Featured Products
Velbon Tripod Stone Bag
Like shooting in windy conditions - This helps weigh down your tripod when filled. Easy to use - Fill with stones on location - or weights . 3 Compartments - Fits each leg of your tripod . Supplied strap - mounting below the tripod head acts as a handy carrier. Made from quality materials - Metal clasps and rugged stitching provides peace of mind. End of line - available while stocks last
£24.75 £9.75
Slik SH-737HD Fluid Video Head
Smooth moving fluid effect 3-way pan head - All metal . Fine tune the tightness (drag) of the movement - Pan and tilt drag controls are separate from the pan/tilt handle locks. Short tilt handle - Reduces the protrusion for ease of travel. Mount for the quick release rotates 360 degrees - Locks down facing in any direction. Dual photo and video use - Moves in two directions like a professional video head. Sturdy - Capable of handling up to 5kg. End of line - available while stocks last
£119.00 £89.00
Velbon QB-667L Quick Release Plate
Quick-Release Plate to fit the following Velbon models - PH-273Q head, QHD-71Q head, QRA-667L quick-release adapter. Standard 1/4 inch tripod screw thread. Attaches to most cameras, camcorders and spotting scopes. End of line - available while stocks last
£14.75 £5.75
Grid
List
Hama Ball and Socket Head, 38mm - 20mm ball
Compact ball and socket head - Suitable for compact tripods and monopods with a standard 1/4 inch screw thread. Diameter of 20mm - 38mm in height. 1/4 inch tripod screw - For attaching your camera or camcorder to the head. Single retaining knob - Tighten to lock in desired position .
In Stock
£19.90
Hama Ball and Socket Head, 50mm - 30mm ball
Compact ball and socket head - Suitable for compact tripods and monopods with a standard 1/4 inch screw thread. Diameter of 30mm - 50mm in height. 1/4 inch tripod screw - For attaching your camera or camcorder to the head. Single retaining knob - Tighten to lock in desired position .
While stocks last - One only
£24.75
Leofoto PG-2S Gimbal Head
Perfect for large lenses - spotting scopes, and cameras. Compact and portable design - Folds into a manageable size for easy storage and transport,. Substantial load capacity - Supports a payload of up to 15kg, ideal for large lenses and cameras. Multiple Mounting Points - Equipped with a 3/8" - 16 threaded hole for tripod mounting and various 1/4" - 20 and 3/8" - 16 threaded accessory sockets for additional gear. Smooth Movement - Fine tune camera balance with plate and arm scales, adjust lens height using the Arca Swiss clamp’s sliding L bracket. Precision - Built in spirit level and numbered scales to help replicate previous settings .
While stocks last - One only
£548.95 £348.95
Sirui RX-100B Levelling Ball Set
Essential tool for videographers and photographers - Who require precise horizontal alignment. Half ball simplifies the process of levelling the tripod head - Eliminating the need to adjust each leg independently. Designed specifically for smooth panning - Ideal for panoramic shots. Includes a 14cm handle that acts as a plumb line, providing users with precise control over the levelling process. Compatible with - SIRUI R-4213X, R-4214X, R-5214X, and R-5214XL tripods. also compatible with SIRUI BCT series broadcast tripods - BCT-3002, BCT-3003, BCT-3202, and BCT-3203 model. End of line - available while stocks last
While stocks last - Two Only
£79.75 £29.75
Sirui SR-66C Centre Column
Genuine Sirui product - Quality and compatibility assured. Retractable centre column - For SR series tripods and easily removable. Ten layer 100% carbon fibre - Lightweight, excellent load-bearing capacity and stability. Extension Range - 115-660mm/4.53-25.98inches. Built in Hook - Add a weight bag for additional stability. Disassembled hook can be removed and used as a tool. End of line - available while stocks last
While stocks last - One only
£118.75 £48.75
Slik Ball Head PBH-635AS
Compact professional ball head - Arca-Swiss type camera platform . Separate pan lock - Locks the ball into place while allowing the head to rotate 360 degrees. Tension knob - Controls the rate of the ball’s movement. Cam Lock quick release system - Allows user to attach or detach a camera from top of the platform and no need to slide in or out the plate from the groove. Degree markings around the base - For stitching together for panoramic photos. Sturdy - Capable of handling a full sized professional DSLR with standard lens. End of line - available while stocks last
While stocks last - Two Only
£108.75 £98.75
Slik SH-737HD Fluid Video Head
Smooth moving fluid effect 3-way pan head - All metal . Fine tune the tightness (drag) of the movement - Pan and tilt drag controls are separate from the pan/tilt handle locks. Short tilt handle - Reduces the protrusion for ease of travel. Mount for the quick release rotates 360 degrees - Locks down facing in any direction. Dual photo and video use - Moves in two directions like a professional video head. Sturdy - Capable of handling up to 5kg. End of line - available while stocks last
Available while stocks last
£119.00 £89.00
Slik Smartphone and Go Pro tripod adaptor
Spring-loaded, rubberised clamp for Smartphone. Two-prong mount for GoPro. Minimum jaw width: 55mm. Maximum jaw width: 87mm. Tripod mounting socket (standard 1/4inch thread). Attaches to tripod, clamp, suction cup or GoPro 3-prong mount.
Good Stock
£9.90 £7.90
Velbon ML-6 Precision Leveller
Multi angle changer - Use as a standalone item or mounted to a tripod head . Precise panning and panorama shots - Adjustable base allows easy tilt adjustment of up to 10° and includes a 360 degree scale. Bubble level - Helps with accurate setup and ensure perfectly horizontal panning. Can be attached to tripods having 1/4" or 3/8" mounting screws - Offers 1/4" or 3/8" options for mounting a head. End of line - available while stocks last
Available while stocks last
£139.75 £79.75
Velbon QB-3AS Quick Release Plate
Quick-Release Plate to fit the Velbon - UT-3AR tripod. Standard 1/4 inch tripod screw thread. Attaches to most cameras, camcorders and spotting scopes. End of line - available while stocks last
Available while stocks last
£18.90 £12.90
Velbon QB-635L B (QHD-62Q) Quick Release Plate
Quick-Release Plate - To fit the Velbon SHERPA 803R tripod and Various QHD & PHD heads. Standard 1/4 inch tripod screw thread. Attaches to most cameras, camcorders and spotting scopes. End of line - available while stocks last
While stocks last - Two Only
£59.90 £49.90
Velbon QB-667L Quick Release Plate
Quick-Release Plate to fit the following Velbon models - PH-273Q head, QHD-71Q head, QRA-667L quick-release adapter. Standard 1/4 inch tripod screw thread. Attaches to most cameras, camcorders and spotting scopes. End of line - available while stocks last
Available while stocks last
£14.75 £5.75
Velbon QB-F51L Quick Release Plate
Extra-long Quick-Release Plate to fit the following Velbon models - SHERPA 538 tripod and FHD-41Q/41QN head, FHD-51Q/51QN head, FHD-61Q/61QN head, FHD-71Q/71QN head. Standard 1/4 inch tripod screw thread. Attaches to most cameras, camcorders and spotting scopes. End of line - available while stocks last
Available while stocks last
£45.90 £24.90
Velbon SPT-1 Lens Supporter
Stabilising Brace - Link the lens mount to the camera mount. Adds stability - When shooting with long telephoto lenses. Compatible - With Arca-type dovetail mounts. Mount threads - For camera, lens and tripod all 1/4" diameter. Adjustable - Mounting distance between camera and lens. Adjustable - Camera mounting column. End of line - available while stocks last
Available while stocks last
£79.90 £49.90
Velbon Tripod Stone Bag
Like shooting in windy conditions - This helps weigh down your tripod when filled. Easy to use - Fill with stones on location - or weights . 3 Compartments - Fits each leg of your tripod . Supplied strap - mounting below the tripod head acts as a handy carrier. Made from quality materials - Metal clasps and rugged stitching provides peace of mind. End of line - available while stocks last
Available while stocks last
£24.75 £9.75